Pier City Custom — custom motorcycle workshop in Henfield
Pier City Custom logo

Pier City Custom

Henfield

About Pier City Custom

Pier City Custom is based in Henfield, in the heart of Sussex on England's south coast; the nearest city is Brighton & Hove. The workshop was founded by Stuart “Stu” Hill and Rory Milton, who both worked at a BMW motorcycle dealership before: Stu as a factory-trained senior technician, Rory as aftersales manager. Dealership time pressure left too little room for care, so they went their own way around the time BMW launched the R nineT. Their logo gives 2015 as the founding year.

The workshop works almost exclusively on modern BMW boxers: every version of the R nineT, the R12 and the R12 nineT, and the occasional R18. Builds go out under the name Pier City Cycles, and the motto is “Bespoke Built, Factory Finish”. The idea is that every bike ends up as clean as if it had just rolled off the line in Berlin. To get there, bolts are swapped for genuine parts with a BMW part number and wiring looms are wrapped in the same tape the factory uses.

Pier City is best known for its own build lines, the Midnight Series and the Muscle Series, and for one-offs such as “Akira”, an R nineT styled after the anime classic of the same name. The workshop is a regular exhibitor at the Bike Shed Show in London, where in 2024 it showed an official BMW custom commission based on the then-new R12. Much of the paintwork is done together with Valkyrie Paintworks.

A customer build starts with conversations and mood boards that lead to a “Genesis” design. All costs for parts, labour and finishes go into a shared spreadsheet the customer can see. Once the donor bike is in the workshop, a build usually takes eight to twelve weeks, and the work comes with a one-year warranty. The workshop has four lifts and a dedicated fabrication room.

Pier City also offers dealer-level servicing with a stamped service book and BMW diagnostic equipment, electronics packages with remapping and shift assistant, blackout packages and parts fitting. Its web shop stocks around a thousand parts for the R nineT and R12, including components made in-house. Visits by appointment only; build enquiries are best sent by email to the workshop.

Favourite base bikes

BMW

Inside the workshop

Pier City Custom — Werkstatt-Einblick 1
Pier City Custom — Werkstatt-Einblick 2
Pier City Custom — Werkstatt-Einblick 3
Pier City Custom — Werkstatt-Einblick 4
Pier City Custom — Werkstatt-Einblick 5
Pier City Custom — Werkstatt-Einblick 6
Pier City Custom — Werkstatt-Einblick 7
Pier City Custom — Werkstatt-Einblick 8
Pier City Custom — Werkstatt-Einblick 9

Services

Full custom buildPartial conversionWiring & electricsEngine diagnostics

Build styles

Café RacerScramblerStreet

Pier City Custom at a glance

Location
Henfield, United Kingdom
Founded
2015
Founder
Stuart Hill & Rory Milton
Custom bikes on MotoDigital
2

How to find Pier City Custom

Unit F2 Blacklands Farm, Wheatsheaf Road, Henfield BN5 9AT, United Kingdom

Questions about Pier City Custom

Who is behind Pier City Custom?

The workshop was founded by Stuart “Stu” Hill and Rory Milton. Both come from a BMW motorcycle dealership, Stu as a factory-trained senior technician and Rory as aftersales manager. Their logo gives 2015 as the founding year.

Which motorcycles does Pier City Custom build?

For customer builds the workshop only uses the BMW R nineT in all its versions and the R12 series. Because it has done most jobs on these models dozens of times, it can quote builds very accurately. If you don't have a donor bike yet, they will help you find one.

How does a build work and how long does it take?

Conversations and mood boards lead to a design, which can also be rendered on request. All costs for parts, labour and finishes go into a shared spreadsheet, and progress photos arrive via WhatsApp. Parts are paid up front and act as the deposit, the rest is due on collection. Once the bike is in the workshop, a build usually takes eight to twelve weeks, and the work comes with a one-year warranty.

Can I have my bike built if I live outside the UK?

Yes. Customers from outside the UK need to supply a bike from their own country. Within the UK and Europe the workshop delivers itself by arrangement or uses a motorcycle courier; according to the workshop, transport usually costs £950 to £1,250, and customs charges may apply.

Does Pier City Custom do servicing?

Yes, the R nineT and R12 get dealer-level servicing with BMW diagnostic equipment and a stamped service book, so the warranty stays intact. Prices are fixed; a full fluid service, for example, costs £315 (as of November 2026).

Can I visit the workshop in Henfield?

By appointment only. The workshop usually works Monday to Saturday but has no fixed opening hours. Appointments by email, phone or WhatsApp.

What kind of builds does Pier City Custom do?

Pier City Custom builds custom bikes in the Café Racer, Scrambler and Street styles. Services include Full custom build, Partial conversion, Wiring & electrics and Engine diagnostics.

Which motorcycles does Pier City Custom work with?

Pier City Custom mainly builds on BMW. Whether your bike is a good fit is best discussed with the workshop directly.

Where is Pier City Custom located?

The address is Unit F2 Blacklands Farm, Wheatsheaf Road, Henfield BN5 9AT, United Kingdom.

When is Pier City Custom open?

Opening hours according to the profile: Mon–Fri: by appointment, Sat: by appointment.

How can I contact Pier City Custom?

By phone: click “Show phone number” under “Contact & links”. Use the contact button on this page to send Pier City Custom a message via MotoDigital. The workshop also has its own website, linked under “Contact & links”.

Contact Pier City Custom

Send Pier City Custom a message directly.

Opening hours
Mon–Fri
By appointment
Sat
By appointment

Contact & links